It’s Back to the Future: The day has arrived

Thursday, Oct 15, 2015, 05:52 AM | Source: Pursuit

Denny Oetomo, Angela Ndalianis

October 21, 2015. The day when Marty McFly and “Doc” Emmett Brown landed in their tricked-out DeLorean time machine; bursting through clouds high above the futuristic town of Hill Valley and narrowly avoiding obliteration by a flying taxi.

A fast-paced science-fiction adventure and a global cultural phenomenon, fans continue to be drawn to the Back to the Future trilogy just as Marty’s evil nemesis Biff Tannen seems to be drawn to trucks piled high with manure.

The second film, first released in 1989, presented an imaginative vision of life in 2015.

It was a world of flying cars on busy skyways, robotic waiters, Max Spielberg directing giant 3D shark holograms in Jaws 19 (“This time, it’s really personal”) and kids in garish clothing darting around the town on that most covetable of futuristic devices, the hoverboard. All realised on film before the digital age of cinema.

Marty uses a hoverboard to get away from the bad guys. Source: YouTube/

Do we recognise today in the film? How much did the ideas in the film inspire actual technological advances? And most importantly, where are our hoverboards?

The University of Melbourne’s Professor Angela Ndalianis, from the School of Culture and Communication, and Dr Denny Oetomo, from the Department of Mechanical Engineering, have the answers.

Professor Ndalianis says Back to the Future II was so successful in capturing the audience’s imagination because it showed an accurate vision of the future.

“The film was close enough to the present to make the predictions about the future strike a chord, both for comic effect but also in terms of asking us to recognise and engage with the possibilities of the future it creates,” Professor Ndalianis says.

“The films had a great influence both cinematically and culturally. The director Robert Zemeckis has always pioneered cutting edge special effects technologies.

“All of his films, including Back to the Future introduced new cutting edge technologies such as CGI (computer generated imagery) and compositing effects, 3D digital cinema, and performance-capture animation.”

The Back to the Future films were renowned for Robert Zemeckis’ inventive use of special effects, in an era before CGI became the Hollywood norm

Professor Ndalianis said watching Back to the Future in 2015 allows us to see fictions that became our reality, such as tablets, wall-mounted flat TV screens, mobile payments, home automation, social networking, smart watches, wearable technology and video conferencing.

Dr Oetomo agrees there is a lot Zemeckis and screenwriter Bob Gale correctly predicted.

However he says we’re not going to be whizzing to work on hoverboards just yet, in the way the film portrays.

“Hoverboards do exist in some form already, but at the moment they can only work on a specially built floor or rail, not on the open ground, as they do in the film.

“The University of Melbourne’s own mechanical engineers are working on a maglev (magnetic levitation) vehicle, but this needs to run on a powered rail.”

“A hoverboard does not have to be constrained to a floor or rail to operate through a magnetic medium.

“We could look at alternative means of creating the hover or levitation effect, such as air thrusters,” says Dr Oetomo.

Lexus recently announced it had developed a ‘Hoverboard’, yet this device can only function on a custom-built ramp embedded with magnets

“In the current devices, such as the Hendo Board or the Lexus Hoverboard, you have to generate your own magnetic field on the hoverboard, and another on a surface to push against. This is done through induction or by using a superconductor in the devices.

“To operate on any arbitrary surface such as is shown in the movie, one would need to utilise a magnetic field that perpetually exists without us having to intentionally generate it, such as the earth’s own magnetic field, the magnet that we have under our feet at all times. The question is, ‘is this enough to enable levitation of a person, rather than just a small object?’”

On landing in 2015, “Doc” proudly shows off his new youthful appearance, achieved with the help of “medical rejuvenation” and blood replacement. Dr Oetomo notes our surgeons and biomedical engineers are already pioneering revolutionary techniques that are improving human lives.

“We already have bionic implants. Within the University of Melbourne’s Department of Mechanical Engineering, we have Dr David Ackland who has created a 3D printed replacement joint. Kidney patients now have dialysis. So it’s possible that our technology could be heading in this direction.”

Every 80s kid’s dream shoes: the Nike ‘AirMAG’ with power laces. Image: Jeff Terrell, via Flickr

Two innovations from the film that sparked the imaginations of fashion geeks were Marty’s size-adjusting jacket and Nike sneakers with “power-laces”. Nike has indeed confirmed that the release of ‘AirMAG’ power-laced kicks is imminent.

Dr Oetomo says that advances in polymer technology would make size-adjusting clothing and self-lacing shoes a possibility.

“There are a lot of intelligent polymers being developed and I’m sure you could run a current through the material enabling it to shorten and change shape. That said, there are a lot of other applications of polymer technology that are probably more useful to humanity than self-adjusting clothing!”

He said the reason we may not see widespread use of some of the imagined technology of Back to the Future is more a matter of prohibitive cost, rather than our ability to create these products.

“At the end of the day it comes down to cost and need. If the problem we’re trying to solve costs much more than the cost of the technology then we would see some of these inventions taking off.”

Dr Oetomo says that the rise in affordable drone technology has enabled innovations from the Back to the Future films, such as the ‘automatic dog-walker.’ Filmmaker Jeff Myers demonstrates the concept in action

Professor Ndalianis said given the current state of special effects, films and television shows are a powerful means of imagining the future.

These imaginings have had a dramatic impact on scientists for decades.

“Science fiction cinema in particular has always had a strong impact on the future, especially in terms of its predictive power to visualise what the future might look like,’’ Professor Ndalianis explains.

Steve Jobs has credited the 1968 film and book 2001: a Space Odyssey – which visualised the tablet computer – as the main influence for the iPad.

In 2002 Minority Report visualised a screen viewing system that had a gesture-based user interface - this was well before Kinect, touchscreens and motion sensing systems became common.

The covetable Hoverboard. Image: Wikimedia Commons

Professor Ndalianis and Dr Oetomo agree that Back to the Future II correctly predicted much of our present.

If “Doc” and Marty were to drive their Delorean another 30 years into the future to 2045 what might they find?

Professor Ndalianis predicts they would find technologies that are even more integrated with us than our permanently affixed iPhones.

“Imagine implants that allow us to ‘think’ our devices to work, advanced automated transport and services and social robots.”

Banner image: Wikimedia Commons

University of Melbourne Researchers