Kenong Xia

Laser powder bed fusion of ultrahigh strength Fe-Cu alloys using elemental powders

A Zafari, K Xia

Journal article  |  2021  |  Additive Manufacturing

Laser powder bed fusion (LPBF) was employed to produce Fe and Fe-(10–50 vol%) Cu immiscible alloys using elemental powders. The ad..

Grain refinement in low SFE and particle-containing nickel aluminium bronze during severe plastic deformation at elevated temperatures

CJ Barr, K Xia

Journal article  |  2021  |  Journal of Materials Science and Technology

The influence of particle size and morphology on grain refinement in low stacking fault energy (SFE) alloys was studied by compari..

Nano/ultrafine grained immiscible Fe-Cu alloy with ultrahigh strength produced by selective laser melting

A Zafari, K Xia

Journal article  |  2021  |  MATERIALS RESEARCH LETTERS

A nano/ultrafine grained immiscible Fe-Cu alloy was produced using selective laser melting (SLM) with an average grain size of 250..

Corrigendum to “Superior titanium from hybridised microstructures – a new strategy for future alloys” [Scr. Mater. 173 (2019) 61–65](S1359646219304397)(10.1016/j.scriptamat.2019.07.031)

A Zafari, K Xia

Journal article  |  2021  |  Scripta Materialia

We regret to have found some inaccurate and/or missing information in our original publication and would like to make the followin..

Consolidation of Pure Magnesium Powder by Equal-Channel Angular Pressing with Back Pressure

Zhuoliang Li, Kenong Xia, Hua Ding

Journal article  |  2021  |  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Pure Mg particles were consolidated by equal-channel angular pressing (ECAP) with back pressure at 423 K. Fully dense bulk Mg with..

Biocomposites Produced from Hardwood Particles by Equal Channel Angular Pressing: Effects of Pre-Treatment

Yu Bai, Xiaoqing Zhang, Kenong Xia

Journal article  |  2020  |  JOURNAL OF COMPOSITES SCIENCE

The benefit of using a combination of alkali pre-treatment and ball milling in processing hardwood particles into biocomposites vi..

Hybridisation of microstructures from three classes of titanium alloys

Ahmad Zafari, Edward W Lui, Shenbao Jin, Mogeng Li, Tesfaye T Molla, Gang Sha, Kenong Xia

Journal article  |  2020  |  Materials Science and Engineering: A

A ternary hybrid Ti alloy (HYTA) was produced by selective laser melting (SLM), combining all three classes of the titanium system..

Deformation-free geometric recrystallisation in a metastable beta-Ti alloy produced by selective laser melting

Ahmad Zafari, Edward W Lui, Kenong Xia

Journal article  |  2020  |  MATERIALS RESEARCH LETTERS

Super-transus heat treatments conducted on an additively manufactured body-centred-cubic β-Ti alloy led to the formation of equiax..

Progress in Severe Plastic Deformation of Metastable Beta Ti Alloys

Ahmad Zafari, Kenong Xia

Journal article  |  2020  |  Advanced Engineering Materials

Metastable β Ti alloys can undergo martensitic transformation under stress. It is shown that such stress‐induced martensitic trans..

Superior titanium from hybridised microstructures - A new strategy for future alloys

A Zafari, K Xia

Journal article  |  2019  |  Scripta Materialia

A new strategy for future alloys by hybridising microstructures of existing alloys using selective laser melting was introduced. I..